DES-DD23 Practice Dumps - Verified By TrainingDumps Updated 55 Questions [Q24-Q49]

DES-DD23 Practice Dumps - Verified By TrainingDumps Updated 55 Questions

Updated DES-DD23  Exam Dumps - PDF Questions and Testing Engine

EMC DES-DD23 Exam Syllabus Topics:

Topic	Details
Topic 1	Monitor PowerProtect DD capacity and estimate storage burn rate Implement Dell EMC PowerProtect DD system with key protocols, including NFS/CIFS, DD Boost, VTL, and NDMP
Topic 2	Describe how to prepare the Dell EMC PowerProtect DD system for installation, including rail and rack the system hardware, and connect and cable the system to external storage
Topic 3	Configure the network for administrative access, and verify interoperability with connected devices Cloud Tier Implementation and Administration
Topic 4	Identify and describe various Dell EMC PowerProtect DD software options and the functionality they enable Manage system access and describe and configure autosupport, Support bundle, SNMP, and Syslog

 

NEW QUESTION 24
A backup administrator is tasked with monitoring PowerProtect DD capacity metrics. The administrator is backing up 2 TB of data daily with a reduction rate at 5x. After data reduction, subsequent full backups compress down to 100 GB.
The initial backup requires 400 GB with a 10 percent increase in the data each day. Each incremental backup is 200 GB. After data reduction, each incremental backup is 20 GB.
What is the weekly burn rate (GB) after six daily incremental backups and one weekly backup?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

 

NEW QUESTION 25
Which command is used to start the initial CLI configuration wizard?

• A. setup
• B. config
• C. install config
• D. config setup

Answer: D

 

NEW QUESTION 26
What is a requirement to configure the PowerProtect DD tape out to cloud feature?

• A. Two cloud units
• B. DDVE in the Cloud
• C. Tape Out to Cloud License
• D. Cloud Tier Capacity License

Answer: D

Explanation:
DD VTL supports storing the VTL vault on Cloud Tier storage. To use this functionality, the protection system must be a supported Cloud Tier configuration, and have a Cloud Tier license in addition to the VTL license.

 

NEW QUESTION 27
An organization uses tape libraries in their current backup infrastructure. They have purchased a PowerProtect DD system and plan to use VTL to move from physical tape.
What is a consideration when configuring the tape size?

• A. Use multiple drives to write multiple streams
• B. Use larger tapes for multiple smaller datasets
• C. Set retention periods for as long as possible
• D. Target multiple drives to write single stream

Answer: A

 

NEW QUESTION 28
What happens to the data when it is moved from the active tier to cloud tier?

• A. It is deduplicated and stored in object storage the native format
• B. It is compressed and stored as object storage in a new format
• C. It is deduplicated and stored in a file system in the native format
• D. It is compressed and stored in block storage in a new format

Answer: A

 

NEW QUESTION 29
An administrator has retained snapshots for a single MTree and is trying to create a new one. An error message is received.
What is the reason for the failure?

• A. There are not enough snapshot licenses
• B. The DDOS needs to be upgraded
• C. The user does not have the permission to retain more snapshots
• D. The maximum number of snapshots has been exceeded

Answer: D

 

NEW QUESTION 30
What system role is required to create the second security officer for a PowerProtect DD?

• A. admin
• B. limited-admin
• C. sysadmin
• D. security officer

Answer: B

 

NEW QUESTION 31
A customer needs a backup system to protect 100 TB of mission-critical dat a. What should be used to back up the system?

• A. DD6900
• B. cloud tier
• C. DDVE
• D. DD3300

Answer: B

 

NEW QUESTION 32
An administrator is scaling Cloud Tier for a DD9400 by adding a second cloud unit. What is the required amount of metadata storage (TB)?

• A. 0
• B. 1
• C. 2
• D. 3

Answer: B

 

NEW QUESTION 33
Which of the following protocols are supported by PowerProtect DD for data movement to a cloud provider?

• A. VTL and DD Boost
• B. HTTP and HTTPS
• C. FTP and FTPS
• D. CIFS and NFS

Answer: D

 

NEW QUESTION 34
The finance department requires PDFs older than 90 days to be archived through Cloud Tier into Azure Blob Storage. They want any PDFs older than 180 days archived into AWS S3.
Which data movement policy is used to archive files into Azure Blob Storage?

• A. Age-based
• B. Age-range
• C. Recall
• D. App-driven

Answer: A

 

NEW QUESTION 35
A customer needs to use DD Retention Lock Compliance to ensure that data integrity is maintained. Which PowerProtect DD systems meet the customer's requirement?

• A. DD6900, DDVE, and DD9400
• B. DD3300, DD6900, and DD9400
• C. DD9400, DDVE, and DD9900
• D. DDVE, DD3300, and DD6900

Answer: B

 

NEW QUESTION 36
An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible.
What is the most likely cause of this behavior?

• A. Source system is running in restricted mode.
• B. Migration will restrict all activities on source systems.
• C. Filesystem is disabled on source system.
• D. Migration will restrict all activities on both systems.

Answer: B

 

NEW QUESTION 37
Which protocol is used for communications between a PowerProtect DD appliance and cloud tier to Dell EMC ECS?

• A. SSL
• B. HTTPS
• C. FTP
• D. SSH

Answer: B

 

NEW QUESTION 38
A storage administrator finished the zoning between the PowerProtect DD and the NetWorker backup server. How can they verify that the zoning was completed properly and the server HBA are visible?

• A. scsitarget initiator show list
• B. scsitarget initiator list
• C. scsitarget show initiator list
• D. scsitarget show initiator

Answer: A

 

NEW QUESTION 39
A customer needs an upgrade on their DD6900 to use HA.
Which expansion shelf is required?

• A. ES25
• B. DS60
• C. ES40
• D. FS25

Answer: C

 

NEW QUESTION 40
A PowerProtect DD appliance with two expansion shelves is being installed in a customer-provided rack. When cabling the controller to the shelves, what is connected to the host port on the last shelf in the chain?

• A. Expansion port of the controller
• B. Expansion port of the upstream shelf
• C. Host port of the controller
• D. Host port of the downstream shelf

Answer: B

 

NEW QUESTION 41
When using CIFS from a PowerProtect DD system, what should be changed on a Windows machine?

• A. CIFSTimeout to 3600 seconds
• B. SESSTIMEOUT to 7200 seconds
• C. SMBTimeout to 7200 seconds
• D. SESSTIMEOUT to 3600 seconds

Answer: D

 

NEW QUESTION 42
What rule must be followed during an upgrade procedure with the FS25 expansion shelf?

• A. If ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that chain is five
• B. FS25 shelf must be on the same chain with DS60
• C. For high performance, the connections from a controller to FS25 shelves must be over FC cables
• D. FS25 shelf is cabled on a separate private chain

Answer: D

Explanation:
Reference: https://www.dell.com/support/kbdoc/en-pk/000082030/71624-memory-requirements-Product Questions: Version: and-storage
https://www.dell.com/support/kbdoc/en-pk/000082030/71624-memory-requirements-Product Questions: Version: and-storage- configurations

 

NEW QUESTION 43
Which command is used to check if NFS is enabled?

• A. nfs show clients
• B. system show
• C. nfs status
• D. nfs enable

Answer: A

 

NEW QUESTION 44
Refer to the exhibit.

To which shelf and port should SAS HBA slot 1 port B be connected?

• A. Shelf 01 BH
• B. Shelf 04 BE
• C. Shelf 01 BE
• D. Shelf 04 BH

Answer: D

 

NEW QUESTION 45
A backup administrator needs to implement BoostFS for Windows. What do they need to install on the Windows server?

• A. CBFS
• B. CIFS
• C. NFS
• D. FUSE

Answer: B

 

NEW QUESTION 46
......

New (2021) EMC DES-DD23  Exam Dumps: https://pdfvce.trainingdumps.com/DES-DD23-valid-vce-dumps.html