UPDATED [2024] Pass Cisco 500-470 Exam in First Attempt Guaranteed
Pass 500-470 Exam Latest Practice Questions
Cisco 500-470 exam covers a wide range of topics, including network design, deployment, and management. It tests a candidate's ability to implement and troubleshoot Cisco's software-defined networking solutions, including Cisco DNA Center, Cisco ISE, and Cisco SD-WAN. 500-470 exam also evaluates a candidate's knowledge of network security, including identity management, threat detection, and mitigation.
NEW QUESTION # 19
Which three methods three technologies and deployed to gather data and provide insight? (Choose three.)
- A. SNMP
- B. Syslog
- C. IPv6
- D. ARP caching
- E. FNF
- F. BUM traffic
Answer: A,B,E
Explanation:
Explanation
Syslog, FNF (Flexible NetFlow), and SNMP (Simple Network Management Protocol) are three technologies that can be deployed to gather data and provide insight into the network performance, health, and behavior.
Syslog is a standard protocol for logging messages from network devices, such as routers, switches, firewalls, and servers. Syslog messages can be sent to a centralized server for analysis, correlation, and alerting. FNF is a Cisco technology that captures and exports information about network flows, such as source and destination IP addresses, ports, protocols, bytes, packets, and timestamps. FNF can be used to monitor network traffic patterns, identify anomalies, and optimize network resources. SNMP is a protocol that allows network devices to communicate with management systems, such as Cisco DNA Center. SNMP can be used to collect statistics, configuration, and status information from network devices, as well as to send commands and notifications. SNMP can help network administrators to troubleshoot, configure, and manage their network devices remotely. References: Cisco DNA Center User Guide, Release 1.3.1.0 - Monitor the Network 1, Cisco DNA Center User Guide, Release 1.3.1.0 - Configure Flexible NetFlow 2, Cisco DNA Center User Guide, Release 1.3.1.0 - Configure SNMP 3
NEW QUESTION # 20
Which are three key features within the Cisco ISE that mainly compete with the other RADIUS and NAC products? (Choose three.)
- A. Guest access and guest lifecycle management functionality.
- B. Software based firewall capabilities for selected devices and endpoints.
- C. Ability to authenticate and authorize users and endpoints.
- D. BYOD provides auto configuration of endpoints.
- E. Deep packet inspection upon authorization of endpoints.
Answer: A,C,D
NEW QUESTION # 21
Which two are benefits from a WAN design? (Choose two.)
- A. Provide lower quality service to guest users
- B. Reduce cost and increase operational complexity
- C. Prioritize and secure with granular control
- D. Ensure remote site uptime
- E. Lower circuit bandwidth requirements
Answer: C,D
NEW QUESTION # 22
Which Cisco SD WAN component provides a secure data plane with remote vEdge routers?
- A. vSmart
- B. vManage
- C. vEdge
- D. vBond
Answer: A
Explanation:
Explanation
Reference :https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/ Release_18.1/05Security/01Security_Overview/Data_Plane_Security_Overview
NEW QUESTION # 23
Which two factors are used in calculating the Cisco SD WAN - 1yr, 3yr, or 5yr subscription cost? (Choose two.)
- A. Routing Protocol
- B. Security
- C. Hypervisor Platform
- D. Service Bandwidth
- E. Features
Answer: D,E
NEW QUESTION # 24
Which two options are used as part of an ISE POV? (Choose two.)
- A. Implementation on Production Network
- B. Cisco TV
- C. YouTube
- D. dCloud
- E. POV Kit
Answer: D,E
Explanation:
Explanation
An ISE PoV (Proof of Value) is a service that demonstrates the value of Cisco Identity Services Engine (ISE) to potential customers. It consists of two components: a virtual machine (VM) and a license. The VM is a pre-configured ISE environment that can be deployed on any cloud platform, such as Cisco dCloud1. The license is a one-time payment that grants access to the ISE features and capabilities for three years2.
The two options that are used as part of an ISE PoV are A and E. Option A refers to the VM, which is the core component of the ISE PoV. Option E refers to the POV Kit, which is a bundle that includes the VM, the license, and some additional resources, such as documentation, videos, and webinars2. Option B, C, and D are not used as part of an ISE PoV.
References: 1 Cisco dCloud 2 ISE PoV licenses
NEW QUESTION # 25
Which three wireless product families are supported in the current DNA-C 1.1 release? (Choose three.)
- A. WLC 5508
- B. WLC 3504
- C. AP 3800
- D. AP 1260
- E. WLC 8540
Answer: B,C,E
Explanation:
Explanation
According to the Cisco DNA Center Compatibility Matrix1, the current DNA-C 1.1 release supports the following wireless product families:
WLC 8540: This is a high-performance wireless controller that can support up to 6000 access points and
64,000 clients. It is designed for large-scale wireless deployments and offers advanced features such as application visibility and control, flexible radio assignment, and software-defined access2.
AP 3800: This is a high-performance access point that can support up to 5.2 Gbps data rates and 4x4 MIMO with four spatial streams. It is designed for high-density environments and offers features such as flexible radio assignment, CleanAir, ClientLink, and Smart Antenna Connector3.
WLC 3504: This is a compact wireless controller that can support up to 150 access points and 3000 clients. It is designed for small to medium-sized wireless deployments and offers features such as application visibility and control, software-defined access, and TrustSec4.
The other wireless product families, such as AP 1260 and WLC 5508, are not supported in the current DNA-C
1.1 release.
References:
1: Cisco DNA Center Compatibility Matrix
2: Cisco 8540 Wireless Controller Data Sheet - Cisco
3: Cisco Aironet 3800 Series Access Points Data Sheet - Cisco
4: Cisco 3504 Wireless Controller Data Sheet - Cisco
NEW QUESTION # 26
Which options are Network Access Device types?
- A. Switches, Wireless Controllers, and Routers
- B. Switches, Wireless Controllers, and VPN Gateways
- C. Wireless Controllers, Routers, and VPN Gateways
- D. Switches, Routers, and VPN Gateways
Answer: B
Explanation:
Explanation/Reference:
Reference: https://www.cisco.com/c/en/us/td/docs/security/ise/1-4/admin_guide/b_ise_admin_guide_14/ b_ise_admin_guide_14_chapter_0100.html
NEW QUESTION # 27
Where does the Cisco V-Edge Router perform QOS traffic classification?
- A. Per vEdge
- B. Per VPN
- C. Egress interface
- D. Ingress interface
Answer: D
Explanation:
Explanation
The Cisco V-Edge Router performs QoS traffic classification on the ingress interface, before the traffic enters the VPN. The classification is based on the match criteria specified in the access lists, which can include the source and destination IP addresses, ports, protocols, DSCP values, and application-aware NBAR attributes.
The classification results in assigning a forwarding class and a QoS group to each packet. The forwarding class determines the output queue and the scheduling policy for the packet on the egress interface. The QoS group is an internal label that can be used to remark the DSCP value of the packet or to match the packet in another access list for further processing. References:
Forwarding and QoS Configuration Guide for vEdge Routers, Cisco SD-WAN Release 20, Chapter 2:
Configuring Localized Data Policy,
https://www.cisco.com/c/en/us/td/docs/routers/sdwan/configuration/qos/vEdge-20-x/qos-book/localized-da Cisco SD-WAN Design Guide, Release 20, Chapter 6: Quality of Service,
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/SDWAN/2020/b_SD-WAN_Design_Guide_Aug_2
NEW QUESTION # 28
Which two products are supported as "Extended" in DNA-C 1.1? (Choose two.)
- A. Catalyst 6807
- B. Catalyst 4500-E
- C. M3 Line cards
- D. Catalyst 3560-CX
- E. IE switches
- F. AP 3800
Answer: D,E
NEW QUESTION # 29
Which are three Cisco recommendations on "How to Win"? (Choose three.)
- A. Demonstrate complex policy flows, rather show case Wizards and enhanced context visibility.
- B. Explain architectural advantage of holistic Cisco solution.
- C. Explain support for 3rd party network devices.
- D. Talk about Cisco's focus on Security and integration with StealthWatch, Sourcefire, WSA, vulnerability scanner to make smarter policy decisions.
- E. Show case Cisco portfolio or ISE feature set during PoC
Answer: B,C,D
NEW QUESTION # 30
What is the role of DNA Center in SD-Access?
- A. provide GUI management abstraction & Analytics via Multiple Service Apps
- B. The point of exchange of reachability and policy for two domains
- C. Identifying and Authenticating Endpoints
- D. Maintain a database of Endpoint IDs to Fabric Edge Nodes
Answer: A
NEW QUESTION # 31
What is the default interval for BFD packets?
- A. 10 Seconds
- B. 5 Seconds
- C. 1 Seconds
- D. 15 Seconds
Answer: C
Explanation:
Explanation
https://www.cisco.com/en/US/technologies/tk648/tk365/tk207/technologies_white_paper0900 aecd80243fe7.html The default interval for BFD packets is 1 second. BFD uses Hello packets to detect the liveness and faults on a connection. BFD Hello Interval packet is sent at the default interval of 1000 milliseconds on all connections1. This command can be used to change the hello interval for a transport color. The interval for transmitting and receiving BFD packets can also be configured on the interface level or the BFD session level, depending on the device and the protocol234. The BFD detection time is calculated as the product of the local detection multiplier and the agreed remote transmission interval. The lower the BFD detection time, the faster the BFD session can detect a fault. However, a lower BFD detection time also consumes more system resources and bandwidth. Therefore, the BFD detection time should be configured according to the network situation and performance requirements. References:
1: Bidirectional Forwarding Detection - Cisco
2: Configuring the BFD Detection Time - CloudEngine 16800 ... - Huawei
3: Cisco IOS XE Catalyst SD-WAN Qualified Command Reference
4: bfd min-echo-receive-interval - Aruba
NEW QUESTION # 32
How many vEdge router security zones (VPN's) can be configured?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation
https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/Release_18.1/04Segmentation/02Conf
NEW QUESTION # 33
Where does the Cisco V-Edge Router perform QOS traffic classification?
- A. Per vEdge
- B. Per VPN
- C. Egress interface
- D. Ingress interface
Answer: D
NEW QUESTION # 34
What definition is not part of 4D Training?
- A. Design
- B. Discover
- C. Defend
- D. Demo
- E. Deploy
Answer: C
NEW QUESTION # 35
Which Cisco SD WAN component provides a secure data plane with remote vEdge routers?
- A. vSmart
- B. vManage
- C. vEdge
- D. vBond
Answer: A
Explanation:
Explanation/Reference:
Reference : https://sdwan-docs.cisco.com/Product_Documentation/Software_Features/ Release_18.1/05Security/01Security_Overview/Data_Plane_Security_Overview
NEW QUESTION # 36
Which three statements best describe Cisco ISE configuration capabilities? (Choose three.)
- A. ISE wizards and per-canned configurations ease ISE roll-out significantly.
- B. ISE Deployment Assistant (IDA) is a built in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE)
- C. ISE requires an understanding of the command line for set-up and configuration.
- D. Cisco Active Advisor provides additional guidance for ISE deployments.
- E. Cisco ISE includes wireless setup wizard and visibility wizard.
Answer: A,B,E
Explanation:
Explanation
Cisco ISE configuration capabilities include the following features:
ISE Deployment Assistant (IDA) is a built-in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE). IDA guides the user through the initial setup, configuration, and verification of ISE with a step-by-step wizard. IDA also provides best practices and recommendations for common deployment scenarios, such as wireless, wired, VPN, guest, and BYOD1.
Cisco ISE includes wireless setup wizard and visibility wizard. The wireless setup wizard simplifies the configuration of ISE for wireless access by automating the tasks of adding network devices, creating authorization profiles, and applying policies. The visibility wizard helps the user to enable device profiling and posture services, and to view the endpoint information and compliance status on the ISE dashboard2.
ISE wizards and per-canned configurations ease ISE roll-out significantly. ISE wizards are interactive tools that assist the user in configuring various features and functions of ISE, such as certificates, network access devices, authentication and authorization policies, guest access, BYOD, and TrustSec.
Per-canned configurations are predefined templates that provide common settings and values for ISE components, such as policy sets, authorization profiles, and network conditions. The user can apply these templates to quickly configure ISE for specific use cases, such as 802.1X, MAB, or web authentication3.
The other options, Cisco Active Advisor and ISE command line, are not accurate descriptions of ISE configuration capabilities. Cisco Active Advisor is a separate cloud-based service that provides network health and security checks, device lifecycle management, and best practice recommendations for Cisco devices. It is not directly related to ISE deployments. ISE command line is an interface that allows the user to perform administrative tasks, such as backup and restore, password recovery, and troubleshooting. However, ISE does not require an understanding of the command line for set-up and configuration, as most of the functions can be done through the graphical user interface (GUI). References := : 1: ISE Deployment Assistant (IDA) - Cisco Identity Services Engine - Cisco, 2: Cisco Identity Services Engine Administrator Guide, Release 2.7 - Wireless Setup Wizard [Cisco Identity Services Engine] - Cisco, 3: Cisco Identity Services Engine Administrator Guide, Release 2.7 - ISE Wizards [Cisco Identity Services Engine] - Cisco, : Cisco Active Advisor - Cisco, : Cisco Identity Services Engine CLI Reference Guide, Release 2.7 - Using the Command-Line Interface [Cisco Identity Services Engine] - Cisco
NEW QUESTION # 37
How many bytes does a VxLAN header add to an original Ethernet frame?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
Explanation:
Explanation
https://www.arista.com/assets/data/pdf/Whitepapers/Arista_Networks_VXLAN_White_Paper.pdf A VxLAN header adds 50 bytes to an original Ethernet frame. This is because a VxLAN header consists of the following components:
8-byte outer UDP header for VxLAN: The default VxLAN destination UDP port number is 47891
20-byte outer IP header: Valid addresses of VTEPs or VxLAN multicast groups on the transport network. Devices in the transport network forward VxLAN packets based on the outer IP header1
8-byte VxLAN header: VxLAN information for the frame. It includes a 24-bit VxLAN Network Identifier (VNI) that identifies the VxLAN of the frame, and an 8-bit flags field that indicates the validity of the VNI1
14-byte inner Ethernet header: The original Ethernet header of the encapsulated frame. It includes the source and destination MAC addresses, the EtherType, and optionally a 4-byte VLAN tag2 The total size of these components is 8 + 20 + 8 + 14 = 50 bytes. Therefore, a VxLAN header adds 50 bytes to an original Ethernet frame.
References :=
VXLAN packet format - Aruba
MTU Considerations for VXLAN | Matt Oswalt
NEW QUESTION # 38
Which two factors are used in calculating the Cisco SD WAN-1yr, 3yr, or 5yr subscription cost? (Choose two.)
- A. Routing Protocol
- B. Security
- C. Hypervisor Platform
- D. Service Bandwidth
- E. Features
Answer: D,E
Explanation:
Explanation
The Cisco SD-WAN subscription cost is based on two factors: the features and the service bandwidth. The features are determined by the subscription tier, which can be Cisco DNA Essentials, Cisco DNA Advantage, or Cisco DNA Premier. Each tier offers different levels of functionality, security, and analytics for the SD-WAN solution. The service bandwidth is the aggregated WAN bandwidth across all the edge devices in the SD-WAN fabric. The subscription cost is calculated as the product of the feature price per Mbps and the service bandwidth. For example, if the feature price per Mbps for Cisco DNA Advantage is $2 and the service bandwidth is 100 Mbps, the subscription cost for one year is $2 x 100 x 12 = $240012 The other factors, such as the hypervisor platform, the security, and the routing protocol, are not used in calculating the Cisco SD-WAN subscription cost. The hypervisor platform is the virtualization environment where the SD-WAN edge software can run, such as VMware ESXi, KVM, or Microsoft Hyper-V. The security is the protection of the SD-WAN network from threats and attacks, which can be enhanced by integrating with complementary products and applications, such as Cisco Umbrella, Cisco SIG Essentials, or Cisco Secure Malware Analytics. The routing protocol is the method of exchanging routing information between the SD-WAN edge devices and the external networks, such as BGP, OSPF, or EIGRP. These factors are not directly related to the subscription cost, but rather to the deployment options, the security requirements, and the network design of the SD-WAN solution34 References := Cisco DNA Software for SD-WAN and Routing Ordering Guide Cisco DNA Subscription Software for SD-WAN and Routing FAQ Cisco SD-WAN Solution Overview Cisco SD-WAN Configuration Guide
NEW QUESTION # 39
Which three services must be enabled under the ISE Admin settings to successfully integrateISE, when integrating ISE with DNA-C? (Choose three.)
- A. Infoblox
- B. SXP services
- C. Threat-Centric NAC
- D. ServiceNow
- E. Passive Identity Service
- F. PxGrid
Answer: A,B,D
Explanation:
Explanation
Cisco ISE configuration capabilities include the following features:
ISE Deployment Assistant (IDA): This is a built-in application designed to accelerate the deployment of Cisco Identity Service Engine (ISE) by providing a guided workflow for configuring the most common ISE use cases, such as guest access, BYOD, and secure wired and wireless access1. IDA also provides validation checks, best practices, and troubleshooting tips to ensure a successful deployment.
Wireless Setup Wizard and Visibility Wizard: These are two of the several wizards that Cisco ISE provides to simplify the configuration of various ISE functions and features. The Wireless Setup Wizard helps to configure the wireless network settings, such as SSIDs, authentication methods, and policies, for secure wireless access2. The Visibility Wizard helps to enable the ISE profiling service, which collects and analyzes endpoint data to identify, classify, and monitor devices on the network3.
ISE Wizards and Pre-Canned Configurations: These are the tools that ease the ISE roll-out significantly by providing ready-made templates, policies, and settings for common ISE scenarios, such as posture assessment, device administration, and threat-centric NAC. These tools help to reduce the manual configuration efforts and errors, and speed up the time to value.
References:
1: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - ISE Deployment Assistant [Cisco Identity Services Engine]] : 2: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - Wireless Setup Wizard [Cisco Identity Services Engine]] : 3: [Cisco Identity Services Engine Administrator Guide, Release 3.3 - Visibility Wizard [Cisco Identity Services Engine]] : : [Cisco Identity Services Engine Administrator Guide, Release 3.3 - ISE Wizards and Pre-Canned Configurations [Cisco Identity Services Engine]]
NEW QUESTION # 40
Device Sensor provides which two types of information to ISE? (Choose two.)
- A. DHCP
- B. NetFlow
- C. Encrypted traffic
- D. User/Device Name
- E. CDP
Answer: A,E
Explanation:
Explanation
Device Sensor is a feature that enables Cisco devices to collect and report information about the endpoints connected to them. This information can be used by ISE to identify and classify the endpoints, and apply appropriate policies based on their attributes. Device Sensor can collect information from various sources, such as DHCP, CDP, LLDP, and HTTP User-Agent. Among the options given, only DHCP and CDP are valid sources of information for Device Sensor. References := : Cisco Identity Services Engine Administrator Guide, Release 2.7 - Device Sensor [Cisco Identity Services Engine]- Cisco (https://learningnetworkstore.cisco.com/c/en/us/td/docs/security/ise/2-7/admin_guide/b_ise_admin_guide_27/b_i
2of30
NEW QUESTION # 41
......
To pass the Cisco 500-470 exam, candidates must demonstrate a deep understanding of Cisco's Enterprise Networks technologies, including the ability to troubleshoot issues and configure advanced features. 500-470 exam is designed to test the candidate's knowledge across a wide range of topics, including network security, routing and switching, and wireless networking.
Cisco 500-470 certification exam is an excellent opportunity for system engineers to enhance their skills and knowledge in Cisco Enterprise Networks. It is a challenging exam that requires dedication, hard work, and industry experience. However, passing 500-470 exam can open up new career opportunities and help system engineers advance in their careers.
Cisco 500-470 Study Guide Archives : https://pdfvce.trainingdumps.com/500-470-valid-vce-dumps.html
